Home Products & Services Downloads Contact Us FAQ Site Index

Hapco Inc. Products

 

Liquid Moulding Compounds Dielectric Packaging Systems Tooling Products
Dispensing Equipment Accessories

 


Liquid Moulding Compounds                                                                                       Back to the top

The ideal moulding system for low volume liquid plastic & liquid rubber parts.

 

Ultralloy & Ultraclear Fast cycling for prototyping & short run parts

ULTRALLOY SERIES
Liquid Moulding Compounds specifically formulated for prototypes and short-run plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in less than 10,000 parts per year volume.

ULTRACLEAR SERIES
Crystal Clear Liquid Moulding Compounds with excellent physical Properties: high heat distortion (HDT), high tensile strength, and excellent impact, are just a few examples.  All ULTRACLEAR systems are available in 2 speeds

Applications:
(LPIM) Low Pressure
Injection Moulding
Open casting
Pressure & Vacuum casting 

Types of Mould Materials:
May be used with silicone, epoxy, urethane, polyester, aluminium or steel. Liquid Moulding Compounds can be moulded in thick and thin sections, and in small and large masses without a marked effect in shrinkage. 

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Ultralloy/ultralloy.htm

 

Hapflex Castable hybrid elastomers in varying hardness's

Hapflex 500 & 600 Series
Room curing, tough, shock and wear resistant, hardness from 45A to 70D.

Hapflex 700 & 800 Series
Low hazard, high strength colourless, elastomers with hardness from 65A to 72D

Hapflex 1000 Series
Tough, colourless, fast cure elastomers with hardness from 20A to 55A.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Hapflex/hapflexseries.htm

 

Tuffalloy Tough fast cycling high impact easy to use

Tuffalloy 4200 Series
Liquid Moulding Compounds with thermoplastic properties. High impact, high heat distortion, low viscosity, and excellent physical properties are presently available.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Tuffalloy/tuffallo.htm

 

Steralloy Specifically designed for FDA - food & drug applications

Steralloy FDG is the first Liquid Moulding Polymer Alloy Series that has been specifically designed for food and drug applications.

All of the products in the
Steralloy FDG
Series exhibit unique physical and chemical properties, pass testing for USP Class 6, are manufactured with FDA approved material, and have excellent processing properties.

Steralloy FDG Series fills the high current demand for products that are used in food and drug applications.



Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Steralloy/steralloy_fdg.htm

 

S-RIM Mould parts in seconds, de-mould in 5 minutes

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Srim/srim.htm

 


Dielectric Packaging Systems                                                                               Back to the top

Materials for high performance electrical packaging and insulating.

 

DI-Pak Elastomeric electrical compounds and Rigid electrical compounds exhibit low moisture vapour transmission

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Dipak/dipak.htm

 


Tooling Products                                                                                                   Back to the top

Hapcast High Performance rigid polymer alloy casting systems

Hapcast 3731 - All purpose casting system. Thin tooling compound.
Hapcast 3732 - The best all purpose high temperature aluminium casting system
Hapcast 3736 - Steel casting system
Hapcast 3738 - High density, machinable

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Hapcast/hapcast.htm

 

Hapcoat Durable surface coats for a wide variety of applications

Elastomeric
Hapcoat 562-564 (Abrasion resistant, low Durometer, surface coat)
Hapcoat 597-599 (Abrasion resistant, medium Durometer, surface coat)
Hapcoat 667-669 (Abrasion resistant, high Durometer, surface coat)

Rigid
Hapcoat 3720 (White, machinable, wet plaster compatible, surface coat)
Hapcoat 3721 - Hapcoat 3721 LV (White, machinable, surface coat)
Hapcoat 3726 (Aluminium filled, high temperature gel coat)
Hapcoat 3727 (Steel filled, high strength, easily applied surface coat)

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Hapcoat/hapcoat.htm

 

Hapflex Tough castable elastomeric hybrid alloys

Hapflex 500 & 600 Series
Room curing, tough, shock and wear resistant, hardness from 45A to 70D.

Hapflex 700 & 800 Series
Low hazard, high strength colourless, elastomers with hardness from 65A to 72D

Hapflex 1000 Series
Tough, colourless, fast cure elastomers with hardness from 20A to 55A.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Hapflex/hapflexseries.htm

 

Haprez High strength laminating systems

Haprez 3742 - Economical, general purpose, laminating & binder system
Haprez 3744 - High Performance laminating paste
Haprez 3745 - Clear, high temperature, laminating resin & binder
Haprez 3745 LV - Clear, low viscosity, laminating resin & binder
Haprez 3746 - Room temperature laminating system
Haprez 3747 - Our best room temperature laminating system
Haprez 3748 - A truly universal, high heat, laminating resin system
Haprez 3749 - Our best high temperature laminating system

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Haprez/haprez.htm

 

Copycast Machinable liquid polymer for fast duplicating

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Copycast/copycast.htm

 

Ultracast Fast curing casting systems for quick turnover

A a series of tough, low cost, high performance, easy to use, casting polymer alloys.
Low shrink, low viscosity, one to one mix ratio, duplicating casting systems that reproduce the finest detail. These systems are easily machined, polished, and hand carved without excess wear to cutting tools. Modifications and repairs are easy. ULTRACAST bonds to itself.
Dimensionally stable, accurate and is ideally suited for most duplicating, reproducing and tooling applications. Some ULTRACAST systems are colour coded to help insure proper ratio and complete mixing. 
ULTRACAST is possible because of new polymer technology developed by Hapco.
When you need fast, exact detail, and accurate duplication, ULTRACAST is the best choice.

Excellent for all types of model applications, tooling applications, fixture and gage applications, moulds, general duplications, and general casting.


No more waiting overnight.
No more warped castings.
No need for carbide cutters to machine.

Will give you exact reproductions every time

Available in three versions and each is available in two speeds.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Ultracast/ultracas.htm

 


Dispensing Equipment                                                                                          Back to the top

Rapidfil Portable Dispensing Systems

A portable low cost computer controlled two component dispensing machine specifically designed to dispense Hapco's products. Rapidfil C is reliable and easy to use!

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/RapidEquip/rapidfil.htm

 

Rapidshot Gun Dispensing Systems

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/RapidEquip/rapidsho.htm

 


Accessories                                                                                                            Back to the top

Grease-It Release Agents for all types of applications

Grease It Two -
A water soluble film forming release agent and parting film, that may be used alone or with GREASE IT WAX.

Grease It IV - A sprayable polymeric silicone that rapidly cures to form an excellent release. Multiple releases may be obtained
.

Grease It Wax L -
A liquid wax release agent that has been specifically formulated to release epoxies, urethanes, and other polymer alloys.

Grease It Wax P -
A hard paste wax release agent specifically formulated to release epoxies, urethanes, and other polymer alloys.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Accessories/grease-i.htm

 

Fill-It Low cost, light, machinable backfill

Low cost, light, machinable backfill material
Specifically designed to be compatible with all HAPREZ laminating systems
When used with HAPREZ laminating systems, a strong, durable, backfill is achieved with excellent physical properties. 
Both the HAPREZ laminating/binder systems and FILL-IT have been chemically treated. 
When combined, this FILL-IT/HAPREZ matrix bonds together and acts as a uniform structure.

A FILL-IT/HAPREZ matrix machines just like wood, without the grain.  When milled, a curled chip is produced, versus dust, when machining conventional polymer plastics.  FILL-IT matrices are strong and will hold threads well.  It can be drilled, tapped, sanded, planed, and all Hapco's Polymer systems bond tenaciously to FILL-IT.

FILL-IT
can be used at various ratios, allowing the user to control cost and properties.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Accessories/fillites.htm

 

Anti-Air Bubble release aid

An additive for HAPCO'S polymer alloy products, which aids in the release of bubbles caused by entrapped air. 
Added during the mixing process or can be pre-dispersed in the B side, before proportioning the components.

Reduces surface tension, which will aid in faster vacuum degassing.
IMPORTANT: Follow directions carefully as to the amounts to be added. Improper amounts of ANTI-AIR can have a detrimental effect on the polymer.

Click on the following link for further information:
http://www.hapcoweb.com/Hapco_Products/Accessories/antiair.htm

 

Back to the top